i2m ABS Emulator R1 2CR BX4

Our i2m ABS emulators allow to remove the entire ABS pump and box.

You can use this and the GYTR wiring harness and original wiring harness to remove the ABS pump. Contact ABS consultants for wiring diagrams and OEM replacements. We have saved a lot and solved problems on the track. You must also meet OEM standards. The brake lines cannot be used from the start. We have steel brake lines available from stock for the front brake and rear brake. There are remnants in the category: Brakes (for R1).

Our removers have all the electronic circuits apt to avoid any error in the central unit.
Their mounting is completely plug&play and there’s no need to modify the origin wiring: you just need to unplug the ABS and plug in our emulator.
This saves up to 1.4kg!

Our ABS removers copy exctly the shape of the original ABS engine plug and replicate the couplings.
No manual intervention needed, no wire to add, no welding to be done, no wiring to be cut: no risk to make a mistake.
Commonly, by completely removing the original ABS system you also loose all Traction Control functions, and it is not acceptable on modern sport bikes. Alike , if the emulator is low quality, it can trigger errors on the central unit.
Our remover, instead, copies exactly all the necessary interface and allows all the others original system their correct operation.
This product is designed for exclusive use ON TRACK. DO NOT use this product on public roads.

Available models:

• Suzuki GSXR 1000 L7-L9
• Yamaha R3 2019
• Yamaha R6 17-19
• Yamaha R7 2022
• Yamaha R1 15-19
• Yamaha R1 2020 / R1M 2020, euro 305,00  (suspension emulator + 50,00 euro’s)
• Kawasaki ZX10R 16-19
• Kawasaki Ninja 400
• Aprilia RSV4 APRC 13-16
• MV F3 675/800